Cable Pulling Winch, 500 daN Pulling Force

Our small winch with high capacity. It is suitable for interior mounting on cable boards, cable laying on ships, removing the dirt from cable cords as well as for pulling in and out of light cable. / Cable Pulling Winches

The Cable Pulling Winches is appropriate for indoor mounting on cable boards, cable laying on ships, cleaning of cable cords as well as for cable pulling in and out of light cable.

Cable Pulling Winches

Standard equipment

Mechanical drive with petrol or electric engine.

Small size

Rope drum with 250 m steel wire rope, Dia. = 5,0 mm (max. rope length 400 m)

Rope drum able to be disassembled for pulling-out the rope

Manual rope layering by the hand lever

Pulling force limitation by the adjustable limit switch by means of scale

Painting: RAL 5015 (blue) or Orange (adjustable)

Optional equipment:

Single phase AC engine 1,5 kW 230 V, 50 Hz.

Bigger rope lengths up to max 400 mt.

Electric brake motor for holding the load.

Other colors upon request!

Cable Pulling Winches

For cable blowing machines please visit https://www.fokmachine.com

Cable Pulling Capstan Winches

Those winches are the best choice for seasonal contracts in telecommunication applications also for electricity supply cable network maintenance , where low space requirements , mobility and reliability are very important, cable pulling capstan winches.

Huge Amount of Power Within Low Space

The winches of this series are powered by a two-cylinder four-round petrol engines via endlessly variable, hydrostatic transmissions., the tension is produced by a twin capstan assembly,As in the heavy-duty series without undue stress on the wire rope, cable pulling capstan winches.

Mobility
The relatively low weight of this compact type of winch, ready for use, i.e. between 1050 and 1200 kg, based on the type, in addition to the overrunning brake, that allows it to be pulled by ordinary passenger car, cable pulling capstan winches.

Reliability
to make sure that your cable pulling machine is ready for use, the winches of this series are provided with certified measuring and controlling devices normally exist in the heavy-duty series of winches. The tension force is logged by the PC 310 pulling force control and recording device.

cable pulling capstan winches

The whole power pack with the operation panel is frame assembled and fully encased by sound proved steel sheet case and able to be locked. The total length, including tow-bar, is 2900 mm.

Technical Data

Standard design:

one-axle chassis with overrunning and automatic reversing brake system, straight tow-bar with ball type coupling, 12 V lighting system and TÜV-approval
Lockable, soundproofed sheet metal bonnet
PC 310 pulling force control and recording system
Electronic meter gage
Operating hour counter
Petrol engine with hydrostatic gear system
Twin capstan system with rope storage drum and 500 m rope
Painting: traffic red RAL 3020

Extras: (on demand)

Other types of engines, painting or rope lengths
Telescopic deflection boom

Dimensions and weights may change if extras are fitted.

Series	Max. Pulling Force kN	Max. Pulling Speed m/min	Engine Power kW	Cylinder	Rope Dia. mm	Length mm	Width mm	Height mm	Weight kg
KN10	10	90	10	1	6	3000	1650	1350	1100
KN20	20	80	12	2	8	3000	1650	1350	1100
KN30	30	60	12	2	10	3000	1650	1350	1250

Specifications are subjects to change without notice

Cable Pulling Capstan Winches

Cable Pulling Winches & Machines

Cable Pulling Winch, 500 daN Pulling Force

Cable Pulling Winches